|
Secured Ordering
Don't
want to order online? Print an order form to fax to us. Click
here!
Same
Day
Shipping
Via
UPS Ground,
Next Day,
2nd Day,
3 Day Select
|
DYNO CAMS
00-6,
89-7EXP,
95-3,
95-6
96-3,
99-3,
AN001-WC
Note: We can ship you
any cam made by Dyno; if you don't see what you want, give us a call.
If Dyno makes it, we'll get it for you!
|
00-6
Recommended Class: Junior/Stock
Target (Max) RPMs: 6200/6500
Spring Pressure (Int/Ext): 18 lbs/17
lbs New
Exhaust lobe has softer opening ramp to help reduce lifter bore
breakage. Extra duration has been added to exhaust closing to
enhance top end. The intake lobe is the proven fast ramp 9503.
Billet lifters recommended. Good cam for unrestricted classes.
$50.00
89-7EXP
Recommended Class: Stock/Junior
Target (Max) RPMs: 6200-5800
Spring Pressure (Int/Ext): 16 lbs/15 lbs
This cam works very well in all stock and super stock
classes.
$50.00
|
95-3
Recommended
Class: Stock/Junior
Target (Max) RPMs:
6500/6200
Spring Pressure (Int/Ext):
18 lbs/17 lbs
Fast ramp,
non-symmetrical cam; #1 selling stock cam in the USA. It's hard
on the valve train, but most racers feel the horsepower it produces
offsets this. Dyno recommends the use of billet lifters and
beefed up tappet bores.
$50.00
95-6
Recommended Class: Purple/Blue
Target (Max) RPMs: 5000/5600
Spring Pressure (Int/Ext): 16 lbs/15 lbs
Fast, short duration cam; works well in rookie motor.
Lots of bottom and mid range. Dyno recommends billet lifters
and tappet bores beefed up.
$50.00
|
|
96-3
Recommended Class: Stock
Target (Max) RPMs:
6800
Spring Pressure (Int/Ext):
20 lbs/18 lbs
Designed to run
close lash with extremely fast ramps; makes exceptional horsepower
with a wide power band; Dyno advises that this
cam is a block buster. There is a possibility of tappet failure
even with billet lifters.
$50.00
|
99-3
Recommended Class: Stock
Target (Max) RPMs:
6800
Spring Pressure (Int/Ext):
21 lbs/19 lbs
Fast ramp cam
designed for the racer who wants to turn his stock unrestricted engine
well into the mid to high 6000 RPM range; excellent top end!
Dyno recommends billet lifters and heat-treated lower retainers as
well as beefed up tappet bores.
$50.00
|
|
Animal Cam
AN001-WC
Recommended Class:
Stock JR CS
Target (Max) RPMs:
6800 - 7200
Spring Pressure (Int/Ext):
~18 lbs
Cam for WKA Animal
Stock; Significant power in the mid and upper power range
$66.27
|
|
PAGE STOCK:
1,2,3,
MODIFIED
|
|
