|
HORSTMAN'S MDC CLUTCH
MADE IN THREE
VERSIONS:
Model MDC-444 (4 spring)
Designed for use in restricted stock, stock, and superstock.
Model MDC-400S (6 spring)
Designed for use in stock, superstock, cage karts stock, heavyweight
classes.
Model MDC-400M (6 spring)
Designed for use in modified classes.
Tommy's no longer carries
these clutches, but we still handle the replacement parts.
|
|
|
|
|
|
|
Item |
Part # |
Description |
|
|
|
1 |
HP 463000 |
SNAP RING |
1.03 |
|
|
2 |
HP 463100 |
OUTER THRUST WASHER 7/8" ID x 1 1/8" OD x .030" THICK |
1.40 |
|
| |
HP 463200 |
OUTER THRUST WASHER 7/8" ID x 1.300" OD x .032" THICK |
1.40 |
|
| |
HP 463300 |
THRUST WASHER, USE 1 OUTSIDE AND 1 INSIDE WITH 11T DRUM |
1.52 |
|
|
3 |
HP 463400 |
BRONZE BUSHING, FITS 12T & 13T DRUMS ONLY |
9.08 |
|
| |
HP 463500 |
NEEDLE BEARING, FITS 14T THRU 21T DRUMS |
9.52 |
|
| |
HP 463600 |
BUSHING, FITS 11T DRUM |
7.97 |
|
|
4 |
|
SEE CHART BELOW -- REPLACEMENT DRUMS -- WE NO LONGER
HAVE ALL THE DRUMS AVAILABLE FOR THESE CLUTCHES. WE DO HAVE 13,
15, 16, 17, 18, 19, 20, 21, 23--
SELECT FROM DROP DOWN LIST |
34.00 |
|
|
5a |
HP 480078 |
THRUST WASHER |
1.31 |
|
|
5b |
HP 480079 |
THRUST BEARING |
3.62 |
|
|
6 |
HP 480090 |
SPLINED DRIVE HUB |
88.92 |
|
| |
HP 463900 |
SPLINED DRIVE HUB, FITS 11T #35 CLUTCH ONLY |
65.71 |
|
|
7 |
HP 464000 |
METALLIC FRICTION DISK |
23.42 |
|
|
8 |
HP 464100 |
FLOATER DISK .075" THICK |
18.96 |
|
| |
HP 464200 |
FLOATER DISK .085" THICK |
18.96 |
|
| |
HP 464300 |
FLOATER DISK .095" THICK |
18.96 |
|
| |
HP 464400 |
FLOATER DISK .105" THICK |
18.96 |
|
| |
HP 464500 |
FLOATER DISK .065" THICK |
18.96 |
|
|
9 |
HP 464600 |
PRESSURE PLATE, 6 SPRING DESIGN |
53.71 |
|
|
9a |
HP 335000 |
PRESSURE PLATE, 4 SPRING DESIGN |
50.12 |
|
|
10 |
HP 334400 |
LEVER GUIDE RING |
16.69 |
|
|
11 |
HP 464700 |
LEVER WEIGHTED FOR STOCK MOTORS, MDC-400S CLUTCH |
6.57 |
|
|
11a |
HP 113500 |
LEVER NON-WEIGHTED FOR MODIFIED MOTORS, MDC-400M &
MDC-444 CLUTCH |
6.46 |
|
|
11b |
HP 305100 |
LEVER, SHORT NOSE, MDC-444 |
2.70 |
|
|
12 |
HP 464800 |
LEVER SUPPORT, ALUMINUM 6 SPRING |
66.13 |
|
|
12a |
HP 444700 |
LEVER SUPPORT, ALUMINUM 4 SPRING |
58.27 |
|
|
13 |
HP 464900 |
SPRING, COLOR RED, HIGH TENSION, .091" DIAMETER WIRE |
3.80 |
|
| |
HP 465000 |
SPRING, COLOR BLACK, MEDIUM TENSION, .085" DIAMETER
WIRE |
3.80 |
|
| |
HP 514200 |
SPRING, COLOR BLUE, LOW TENSION, .075" DIAMETER WIRE |
3.17 |
|
|
14 |
HP 334700 |
SPRING RETAINER, FITS ALL MDC SPRINGS (SET OF 6) |
6.45 |
|
|
15 |
HP 334800 |
ADJUSTING SCREW, 10-32 x 3/4" FLAT HEAD |
1.01 |
|
|
16 |
HP 334900 |
CAP SCREW, 10-32 x 3/8" SOCKET HEAD |
.91 |
|
|
17 |
HP 465100 |
SPECIAL KEY 3/16" |
1.95 |
|
|
18 |
HP 465200 |
WASHER 5/16 ID |
.69 |
|
|
19 |
HP 465300 |
BOLT 5/16-24 x 3/4" HEX HEAD |
.67 |
|
|
23 |
GP 465600 |
OUTBOARD MOUNTING SPACER KIT, 12T THRU 21T ONLY |
12.38 |
|
|
